Seamless aluminum gutter installation in the Phoenix Valley costs about $8–$14 per linear foot, which puts a typical single-story home at roughly $1,200–$2,500 installed. The spread comes from the roof, not the metal: height, run length, corners, downspouts, and fascia condition drive most of the difference. This page lays out those ranges so a quote does not surprise you.
AZ Gutter Pros quotes installation in writing, and the estimate is free.
What a typical Valley job costs
These are market ranges rather than a rate card, and your written estimate is the number that counts.
- Seamless aluminum, 5-inch, single-story: $8–$14 per foot, usually $1,200–$2,500 total.
- Seamless aluminum, 6-inch: typically a few dollars more per foot.
- Two-story home: often 25–50% more per foot, since the work is slower and riskier.
- Copper: roughly $25–$45 per foot, covered in our material comparison.
- Removing old gutters: usually a small added line item per run.
What moves the number
A few line items explain nearly every price gap between two quotes.
Run length and corners. A simple rectangle costs less per foot than a house with six corners and two valleys, since every corner is extra cutting, sealing, and labor.
Roof height. Two-story walls and steep rooflines need more equipment and time.
Downspouts. One downspout for every 30–40 feet of run is typical. Extra ones, and long extensions to carry water off the slab, add cost.
Fascia condition. Gutters hang from the fascia board. If the board is soft or split, it has to be repaired first, and that is the most common surprise on older Valley homes.
How to read a quote
A real quote lists the profile size, the material and gauge, the linear footage, the number of downspouts, and where each one discharges. If a quote just says “gutters, $1,800,” ask for the breakdown.
A written estimate should also say what happens to the old system, who pulls any required HOA approval, and what is excluded. Quotes that leave these out tend to produce add-ons later.
Where the price differs across the Valley
Newer tract homes in Queen Creek and Laveen are usually simple rooflines with sound fascia, so installation is straightforward. Foothill homes in Cave Creek, Carefree, and Fountain Hills often have steeper rooflines and more corners, and Paradise Valley estates can include longer runs and custom profiles.
Older homes in Sun City West, Youngtown, and El Mirage frequently need fascia work before the gutters go up.
Installation or replacement?
If the home has no gutters, this is a new gutter installation. If old gutters are failing, it is a gutter replacement, and the quote includes removal and disposal.
When a run just needs a seam resealed or a hanger replaced, the honest answer is a repair, and we’ll say so. A replacement quote for a problem a repair solves is not a good estimate.
What a good estimate leaves out
A good estimate does not add downspouts, a larger profile, or copper beyond what the roof needs. It also does not quote an installation over fascia that is going to fail, because gutters hung on rotten wood fall off.
If the estimate you receive pushes expensive options without explaining why the roof needs them, ask for the reasoning in writing.
Get a Free Estimate
Send the address and we’ll quote your roofline in writing. Request a free estimate or call (602) 536-0941.